Best Boss Buck Feeders Reviewed & Rated for Quality
Their strength and durability will also keep them from falling over and spilling in the event that a larger animal is trying to get into the feeder and steel the deer feed. Another reason why these feeders are so great is that you can exercise a large degree of control over how quickly the feed is distributed.
Criteria Used for Evaluation
When you are picking out a deer feeder, you are going to want to consider the size and the overall feed capacity of the feeder. This is a critical decision because while a large feeder does not need to be filled as often as a small one, it also will weigh more and can be more difficult to set up. On the other hand, a small feeder will need to be filled frequently and may not be suitable to use in all situations. This is why you should consider a few different factors when you are picking out the proper size of the feeder.
One thing to consider is the location of the feeder. If the feeder is fairly accessible, then it may not be a problem to use a smaller feeder as long as you don’t mind checking on it more often. If you don’t want to have to keep checking on your deer feeder, then you can also use a larger one in this case as well since you can likely use your vehicle or an ATV to transport a larger feeder. If you are planning on using the feeder in a remote area that is accessible to vehicles such as a truck or an ATV, then you may want to go with a larger feeder so that you don’t have to check it as often. Otherwise, you should use a smaller feeder with an automatic system so that it doesn’t go empty as fast.
Another thing to consider is the number of deer that you want to feed. If you are buying supper for a large herd, then you will need a larger feeder or smaller feeder. On the other hand, if you are only going to be feeding a few deer then you should be found with a smaller feeder.
Most deer feeders are either gravity fed or automatic feeders. As an added bonus, Boss Buck brand feeders can usually be converted from one type to the other if you have the proper kits to do so. When you are shopping for a feeder, you will want to think about how the feed is ultimately distributed from the feeder. There are some cases where gravity fed feeders are preferable to automatic ones, but sometimes an automatic feeder is better to use than a gravity fed one.
If you are trying to feed a lot of deer and get their weight up, then you may want to go with a gravity fed feeder. As the name suggests, these feeders simply use gravity to allow more corn or protein pellets to pass through the feeder to the deer. You can control the flow on the inside of the feeder but you should plan on going through a lot of feed with this sort of feeder. These feeders will just simply add more food as needed which means that there is no way to control excessive eating.
If you need to control excessive eating, then you will need to get an automatic feeder. This style of feeder feeds on an interval that you set. A faster interval will allow more feed while a slower one reduces the amount of feed that is distributed. Automatic feeders are ideal for when you aren’t near a feeder and so it needs to last longer. They are also useful in making sure that animals do not simply gorge on your feeder until it is empty. The main drawback of this kind of feeder is that it requires a battery or some other power source.
Due to the simple fact that animals do not read, it is not going to be very effective to put up a sign near the feeder that instructs other wildlife that the feed is for deer only. The reality is that other animals including rodents, small mammals, and even birds may try and eat the feed that you intend to be eaten by the deer. While small animals are unlikely to tip over a feeder, the deer themselves may tip it over and other animals such as wild hogs or even bears may also try to knock the feeder over as well.
This is why it is important to make sure that the feeder is stable. When you are looking at getting a feeder, you will need to make sure that the legs are strong enough not to bend under the weight of the feed but also to resist bending in the event that animal starts to push against the feeder in an attempt to tip it over. It also needs to have strong feet as well that won’t sink into the mud and become unstable. This could cause the feeder to tip over and spill which can result in damage.
The feeder will need to mount in a secure fashion. Most Boss Buck Feeders have strong legs and support and are built specifically with the above-mentioned concerns in mind. However, when you go to put a feeder out in the wilderness, you will still want to pay attention to the location to make sure that the feeder is on stable ground. Otherwise, even the best-made feeders are still prone to tipping over when pushed against.
Regardless of the brand of feeder that you end up choosing, you are going to want to make sure that it is well made. Quality matters because if you have a lack of quality, then you are not going to get your money’s worth from your purchase. People will rarely remember exactly how much they spend on something that they are satisfied with, but almost everyone will remember if they are not happy with their purchase.
There are a few different things that you should look for in a deer feeder if you are purchasing one. One thing that you have to recognize is that any components that are made of steel will rust once they are exposed to moisture. This includes things such as legs, fasteners, hinges, and other components. You should make sure that all steel is either powder coated or galvanized in order to protect against rust. Otherwise, your feeder will be prone to failure.
When you are picking out an automatic feeder, you will need to make sure that all of the moving parts operate correctly. All electrical components need to be insulated and protected not only against moisture but also from rodents or animals that may be inclined to chew on the wires. Furthermore, you will need to make sure that the batteries are well made in order to make sure that they remained charged for a reasonable amount of time.
The other thing to check is that the hopper is made of a material that preserves the feed. It should have an interior plastic liner so that feed doesn’t leak if the exterior wall starts to rust or gets punctured. The better your feeder is built, the happier you will be with it.
Top 10 Picks
1. Gravity Feeder 1200 LBS
Large deer feeders are the perfect thing to have when you don't have the time to continuously monitor your deer feeder. The advantage of this feeder is that it can hold up to 1200 lbs of deer feed which means that you will not have to refill it as often. You can trust that your deer herd will be well taken care of with this feeder.
The feeder has an extra large capacity that allows you to store up to 1200 lbs of feed. This will help make sure that you don't have to fill it as often.
The lid is oversized and fits loosely on the feeder so that it ventilates properly. This will help to make sure that the feed lasts longer and doesn't go bad.
Cost and Value
You will need to plan on spending an amount that is much higher than the average price. This is because of the extra large size of the feeder which raises the cost.
2. Automatic Feeder - 600 LBS
You may need to control how quickly feed is dispensed from the feeder during the fall and winter seasons. This feeder has a digital controller that allows you to control how much and how often feed is distributed from the feeder. You can convert it to a gravity fed system for the spring and summer seasons making it a great feeding solution.
This feeder can be controlled with a control box that allows you to control how much feed is distributed from the feeder and the time intervals for dispensing feed.
Parts that are made of metal are known to corrode and rust which is why they need to be protected from the weather. This feeder uses galvanized steel parts which are less likely to rust.
Cost and Value
You will need to plan on spending an amount of money that is higher than the average price. The higher price is due to the larger size and digital control box found on the feeder.
3. Free Choice Protein Feeder
The Free Choice is a feeder that can be converted between a spin feeder and a gravity fed one. It offers all of the features that you would expect find in a high-quality deer feeder that include long-lasting construction and multiple feeding ports. You will love how easy it is to set up and use this feeder to draw in the big bucks.
Three Way Feeding
The feeder is a gravity fed system that offers three different feeding ports. All of the ports have a ten-degree angle and stand at a height of forty inches.
You may want to control the rate in which feed is dispensed during the fall and winter seasons. The free choice can be converted into a spin feeder for these seasons.
Cost and Value
You can purchase this item at a price that is lower than the average price for a feeder. The lower price is due to the smaller capacity and gravity fed system.
4. Hanging Pail
If you already own 55 Gallon Drums and wish to turn them into deer feeders, then you can use this item to hang them properly so that they don't fall. This is a strong hanging bail that comes with a 1000 lbs pulley. This will allow you to suspend 55-gallon drums of feed to the deer and let you reuse them.
Powder Coat Finish
Steel will rust when it is exposed to moisture which means that it has to be treated in order to prevent this from happening. This feeder is powder coated to prevent rust.
1000 Lbs. Pulley
A pulley is attached to the top of the feeder and is capable of supporting up to 1000 lbs of force. You can trust it to properly suspend your steel drums of feed.
Cost and Value
This is a low-cost item that is sold at a price that is much lower than the average price due to the fact that you use your own steel drums with it.
5. Automatic Feeder - 1200 LBS
This is an extra large capacity feeder that dispenses feed automatically based on its settings. The extra large size is great because it means that you will not have to refill it as often. This makes it into an ideal choice for when you don't' want to check your feeder on a regular basis or are managing a large deer herd.
It has legs that can be adjusted from a height of 108" all the way up to 132". This will allow you to adjust it to the height that you need to feed the deer.
Adjustable Inner Sleeve
The feeder has an inner sleeve with an adjustable height. You can use this inner sleeve in order to adjust the rate in which feed is dispensed through the feeder.
Cost and Value
You will need to plan on spending an amount that is much higher than the average price. The high price is due to the feeder's large capacity and automatic feed system.
6. Gravity/Protein Deer Feeder
This is a smaller version of the 1200 lbs gravity feeder model. You can trust that it will last for a long time thanks to the heavy-duty construction of the feeder that uses galvanized steel in order to avoid corrosion and rust. The feeder's design will ensure that feed is distributed evenly so that all of the ports are fed.
The inside of the feeder has a cone that ensures that grain is distributed evenly to all of the feeding ports. This feature maximizes the use of the feeding ports.
It has an inner sleeve with an adjustable height. You can use this sleeve to control the rate in which feed to distributed from the feeder to maintain control over how much feed you are using.
Cost and Value
You can purchase this item at a price that is slightly higher than the average price. The higher price is due to the higher capacity of the feeder which costs more to make.
7. All In Gravity Tripod - 200 LBS
This is a smaller feeder that is easy to move around when you need to rotate your feeding locations. You will have no trouble setting up the feeder thanks to the tripod system that keeps it stable. The unit is designed to distribute food nice and evenly from the three different feeding ports. It also is designed to maintain an ambient temperature.
The hopper in the feeder is made of a food-grade plastic that will not rust or corrode the way that metal would. This helps to keep the feed fresh.
The feeder's lid has a hatch design that will make sure that it stays shut. It's also double walled which means that it will prevent condensation from forming on the inside.
Cost and Value
You will be able to purchase this item at a price that is much lower than the average price. The lower price is due to the feeder's small size which makes it cost less.
8. Automatic Deer Feeder
This is an automatic deer feeder, which is ideal for the fall and winter seasons where you need to have more control over the feeding. It uses a powerful blower motor along with a door slinger to distribute the feed. You can set it on a timer schedule which will make it feed only when you need it to feed.
The feeder uses parts that are made of galvanized steel. This is a steel alloy that is more resistant to rust which will help the feeder last longer than other feeders.
Your feeder requires proper ventilation in order to make sure that your feed stays fresh. The lid on the feeder is designed to allow air to pass through so that your feed doesn't get moldy.
Cost and Value
This feeder can be purchased at a price that is considered to be average. The average price makes it into an excellent value since you get a high-quality feeder without paying a premium for it.
9. Tripod Game Feeder - 200 LBS
This is a small version of the Boss buck feeder system. It can hold up to 200 pounds of feed and the automatic feeder will make sure that the deer do not eat the feed too quickly. It's an ideal choice for when you need to feed deer in more remote locations thanks to its smaller size which makes it easy to transport.
The hopper is made with the same manufacturing process that is used to make kayaks. It won't rust or break down and it's also resistant to UV radiation which will help it last longer.
The feeder can be converted into a gravity feeder if you need to do so. You will need to purchase the conversion kit and then install it in order to make it into a gravity feeder.
Cost and Value
You can purchase this item at a price that is lower than the average price. The lower price is due to the smaller size of the feeder that makes it cost less.
10. 55 Gallon Barrel Band System
The Barrel Band System is the perfect option for do-it-yourselfers. It is made of a strong steel frame that will support 55-gallon steel barrels. You can use the barrels as a hopper to store feed for the deer and design your own feeding system. This stand is made of high-quality steel that is long lasting and is treated to avoid rusting.
The band system will attach to a 55-gallon barrel or similar item in a matter of minutes using only basic hand tools. This allows you to get going quickly.
Drill Free Leg System
You can increase the height of the feeder by adding additional square tube legs. The holes are already drilled and treated so that they do not rust when the feeder is put outside.
Cost and Value
The barrel band system can be purchased at a price that is much lower than the average price. The low cost is due to the fact that it is a steel stand and not a full feeder.